W Series

Standard Screw Pump

The ‘W’ Series pump is a part of the standard Progressive Cavity type pumps with a slight change in design. These Pumps are specially used for applications where the media is highly viscous & a higher concentration of solids.

A Wide-Throat design ensures that the media enters the pump cavity easily by avoiding any clogging at the suction end , the Media flowability is maintained using a screw conveyor better known as a ‘Augar’.

Flow rate: 0-420 Cu. M/hr (0-1320 USGPM)
Pressure- up to 36 Kg/cm2
Temperature- Up to 200 Degree C
Viscocity – 1,50,000 CST

Advantages and Characteristics

Steady, low-pulsation pumping
High self-priming rate
Installation possibilities in all positions
Direction of rotation and thus delivery flow reversible
Non-clogging: handles solids in suspension or mixture containing high percentage of solids.
Can work on Snore: inherently self-priming.
High Suction Lift: low NPSH(R), effective in high vacuum conditions.
Minimal Internal Wear: Gentle handling of shear sensitive and abrasive products because of low internal velocity.
Reversible: suction and delivery ends can be interchanged by merely changing direction of rotation of the prime mover.
Versatility: handles abrasive, shear sensitive and viscous materials, solids in suspension and air-solid-liquid mixture.

ADD-INS

Bridge Breaker Paddle Assembly Used for highly viscous and crumbly media which tend to form bridge
Counter Hopper Is used on top of the existing hopper to increase the holding capacity of the hopper.

Range WAP- Bareshaft design with a Pin Bush Type Universal Joint

This range with its Bareshaft design facilitates universal configuration of drives through flexible couplings or V-belts
WAP range uses the totally encapsulated Pin-Bush Type Universal joints , these are long lasting and ensure a low maintenance and replacement cost.
Convenient to service through plug-connection between rotating unit and drive shaft of the pump

W Series
Range WAC-Bareshaft design with a Cardon Type Universal Joint

WAC Range uses a Heavy Duty, Robust , Long Lasting Cardan Type Universal Joint
Frequency of parts replacement is reduced due to robust Joint Design , they function seamlessly even in the most ardous & demanding Industrial applications.
This range with its Bareshaft design facilitates universal configuration of drives through flexible couplings or V-belts
Convenient to service through plug-connection between rotating unit and drive shaft of the pump
Low Life Cyle Costs
12 Month Cardon Joint Warranty **

W Series
Range WDCP- Compact (Block) design with a Pin Bush Type Universal Joint

Short, compact design with directly flange-mounted drive (block design)
Cost-efficient, since drive casing, flexible coupling and common baseplate are normally omitted
WDCP Range totally encapsulated Pin-Bush Type Universal joints , these are long lasting and ensure a low maintenance and replacement cost.
Suitable for restricted spaces of operation or mobile pump sets along with low maitainence & cost effectiveness.
Service Friendly due to plug in connection between rotating unit and drive

Range WDCC- Compact (Block) design with a Cardon Type Universal Joint

Short, compact design with directly flange-mounted drive (block design)
Cost-efficient, since drive casing, flexible coupling and common baseplate are normally omitted
SDCC Range uses a Heavy Duty, Robust , Long Lasting Cardan Type Universal Joint
Frequency of part replacement is reduced due to robust Joint Design , they function seamlessly even in the most ardous & demanding Industrial applications
Suitable for restricted spaces of operation or mobile pump sets along with low maitainence & cost effectiveness.
Service Friendly due to plug in connection between rotating unit and drive

Range WDCC- Compact

Various Control Systems are available for applications in the area of dosing technology and for protecting pumps, We offer individual components for control as well as complete control panels to enable our clients a convenient and effective control system.

ROTOMACTM Dry Running protection device (TSE)

Rotomac DRP(TSE) is a very important accessory for Progressive cavity screw pumps, it is a critical device which can help avoid any case of dry running of the pump and damage to the stator.

The device consists of carefully calibrated temperature sensor which detects the sudden increase in temperature caused due to excess friction when dry running occurs in the pump, this sensor is connected to a control panel which cuts of the power to the prime mover at the pre-set temperature thereby safeguarding the pump from any damage.
W Series

GAUGES

We offer a variety of gauges generally used with the pumping system for the constant measuring and monitoring. Such as Pressure Gauges ,Vaccum gauges & differential gauges)

These gauges are important for dynamic characteristic systems and should be a part of the whole package

The selection of these gauges vary from process to process and application to application
W Series

Safety Relief valve
The Safety Relief valve (SRV) is a type of valve used to control or limit the pressure in a system or vessel which can build up by a process upset, instrument or equipment failure.

Our carefully designed valves are extremely robust in nature and are designed to suit our pump systems

W Series

Pressure Switches

Pressure switches are employed along with our pump systems to protect it from excess pressure build-up . A pressure switch is a form of switch that closes an electrical contact when a certain set pressure has been reached. This protects the system from over pressurisation or when the pressure reaches too low for it’s capability.

W Series

Proximity Switches

These sensors can be used in the pump installation to protect the pump form dry running , these switches cut off the power to the prime mover when these sensors do not sense media entering the suction chamber , hence protecting the pump from damage.

W Series

Serving Western Canada Call Us (403) 214-2049

W Series